S-2262 Pattern Plate for Rolling Mills & Hydraulic Presses

Model No.: S-2262

Use your rolling mills to emboss finely detailed patterns into your metal using this 3mm pattern/design plate. Crafted from a special steel, this plate will produce a detailed low-relief pattern on metal up to 16-ga thick.

For use with our Indian line of rolling mills, we supply a special set of gears with it, at extra cost.

Note: Plates may be used in either with your hydraulic press or rolling mill. The same plate shouldn’t be used interchangeably between the mill and press.

Model No.	Weight	Description
S-2262	180 gm	Plate only

Category: Metal Forming - Rolling Mills

S-2261 Standard Wooden Drawplate

Model No.: S-2261

For drawing soft metal wires. With an integrated handle.

Model No.	Weight
S-2261	50 gm

Category: Metal Forming - Rolling Mills Tag: wooden drawplate

S-2260 Pouches for Storing Drawplates

Model No.: S-2260

Sturdy, leather-feel pouches to store drawplates. Can be custom-made also, as per size or material.

Model No.	Weight	Description
S-2260A	60 gm	8-1/4 x 2″ (ht)
S-2260B	68 gm	10-1/4 x 2 (ht)

Category: Metal Drawing / Rolling Mills Tag: pouch for drawplate

S-2259 Ethno Pattern Roller

Model No. : S-2259

Pre-patterned upper roller to give an attractive floral/ethnic look. The standard flat roller fits the bottom. Can be used with our standard mini rolling mills: S-1181, S-1180, S-1404 & S-223.

Model No.	Weight
S-2259	1100 gm

Category: Metal Forming - Rolling Mills Tag: roller

S-2267 Wood Handle Pin Vise with 7 collets

Model No. : S-2267

Ergonomically shaped varnished hardwood handle with a mounted screw chuck. Comes with 7 interchangeable collets with sizes from 0.8mm to 6mm (1/32″ to ¼”).

Model No.	Weight
S-2267	200 gm

Category: Products Tag: wood handle with 7 collet

S-2266 Multi-purpose Bench Vise

Model No. : S-2266

Vertical design. Useful for holding ring mandrels, forming stakes and even bracelet mandrels with tangs.

Model No.	Weight
S-2266	3250 gm

Category: Products Tag: bench vise

S-301 Miniature Clamp/Vise

Model No. : S-301

Handy metal clamping vise. 2″ long jaws open conveniently wide to allow the user to hold parts together for soldering, gluing and other operations. Hand screws adjust to any angle thereby allowing the tool to also be used for clamping angled work.

Model No.	Weight	Description
S-301B	205 gm	2.5″
S-301C	215 gm	3″
S-301D	330 gm	4″
S-301E	415 gm	5″
S-301F	445 gm	6″

Category: Products Tag: miniature clamp

S-2265 Swivel Hexagonal Head Pin Vise

Model No. : S-2265

With heavy-duty winged nut to securely tighten the chuck.

Model No.	Weight
S-2265	50 gm

Category: Products Tag: swivel hexagon head pin

Flip book element